View Single Post
Old 11-14-2021, 09:57 PM   #1
Steve B
Not Yet Wild
 
Join Date: Nov 2021
Posts: 3
Default Yamaha G19E 2001 Won't Go

Brand new Li battery supplies 52V and new solenoid but nothing. The Tow/Run switch allows power to the big solenoid terminal when on Run and not when on Tow, so that seems to work, but nothing changes when any other switch is on or off (like ignition, reverse/forward) with the exception of the reverse buzzer which works intermittently. We think that is just a defective buzzer? When tow/run is sent to run, we seem to get power everywhere. Both sides of the control wires on the solenoid seem to be hot with 52V for some reason. Testing with the negative on the battery and the positive on either of the small terminals of the solenoid yields 52V. That can't be right? This must be a wiring issue? Where should the red/white control wire from the solenoid go? It seems like red/white is always hot? What voltage should red/white be? Any help would be appreciated. Thanks!
Steve B is offline   Reply With Quote