Re: Jerky Start, Jerky Stop
So do you have the self-adjusting brakes or do you have the old style with the Nipple Cover on the back side of the hub?
Either way it maybe sounds like your brake cable could be a little short or too tight, in which since you added the kit you may need to loosen the anchor that's hooked to your brake pedal until there's just enough slack. (Like 2 , 1/2 inch wrenches are needed and it's directly under the floor board.
Also, it sounds like when you put the HD leafs in you must of loosened a connection on your motor, or controller, or solenoid. Double check for any loose connections.
|