Re: no action any where
I have tested that fuse and it is good . The main plug into the controller apoear good but if you wiggle it sometimes the back up alarm will work but sometimes it will stay on even when the switch is moved to forward. Also occasionally the solenoid will click like it is cycling but nothings happens forward or reverse.
I didn’t get any ohm readings with the TPS Plugged in and my ohmmeter on the main plug wires are black,blue and orange. Probing those wires at the main plug while it was unplugged was supposed to give a1-150 ohms and the other pair were supposed to have 0-5000 ohms . I got nothing
A bad TPS should stop the solenoid from cycling when you energize the tow run switch or will it.
Fortunately all the parts i have replaced so far were in fact faulty but I seem no closer to getting a running cart
|