2007 Emerge Reducer Replacement
I wanted to replace the reducer that I have in my 2007 Tomberlin Emerge, so I ordered a new one but now I'm confused as to how to install it. The old one has only 3 wires Red, Black, & Yellow. The yellow and Black were hooked up to the Solenoid. The new one has 4 wires. I have no idea where they go. PLEASE HELP. I have included some pics of the old one and how it was hooked up to the Solenoid.
The Yellow wire had a fuse on it and was hooked up to one of the Large Terminals of the Solenoid. I figured out that this was for the headlights.
Black wire was hooked up to the Positive small terminal of the solenoid.
Red wire was clipped into the wiring harness.
The side of the reducer lists 4 wires, but there are only 3 coming from the reducer. The new reducer has 4 wires - input48v Pos and Neg & Output 12v Pos and Neg. How do I hook this up?
|