Buggies Gone Wild Golf Cart Forum - View Single Post - Gifted old wood lathe, metal lathe and stick welder

Swan · 08-28-2020, 10:15 AM

the triangle thing is a drift pin used for removing the live or dead stop on the collet end of the lathe.

the bottom 3 items look like dead stops and the other two looks to be a adapter for the collet to hold the small dead pin (see the slot that where the drift pin goes to remove the dead stop from the adapter .

Anything like those that spin would a live stop which is in the collet in the 1st pic of the lathe itself . if you crank that out a bit you will see a slot in that for the drift pin also

hard to see on a small pic

08-28-2020, 10:15 AM	#7
Swan Cave Dweller Join Date: Apr 2013 Location: Always On The Move Posts: 22,238	Re: Gifted old wood lathe, metal lathe and stick welder the triangle thing is a drift pin used for removing the live or dead stop on the collet end of the lathe. the bottom 3 items look like dead stops and the other two looks to be a adapter for the collet to hold the small dead pin (see the slot that where the drift pin goes to remove the dead stop from the adapter . Anything like those that spin would a live stop which is in the collet in the 1st pic of the lathe itself . if you crank that out a bit you will see a slot in that for the drift pin also hard to see on a small pic