View Single Post
Old 11-22-2019, 07:12 AM   #4
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: Bob Boyce!!! Need help with 48v solenoid!!!

His controller is set to use a 36V solenoid, and has already been mailed back out to him. While I had his controller on the bench, I found a recent hours repeated history of the solenoid failing to close. I did not want his controller to get corrupted by a failing solenoid, so I advised him to change it. I thought he said it was in a 2016 RXV, so I advised him to get a 48V solenoid. I just checked the controller file and it is indeed set for a 36V solenoid... It looks like maybe the original 1206AC-5211 controller was replaced with an earlier 1206AC-5201 controller at some point, as it has a very early 2015 date code. That would explain the solenoid failed to close error list! Be sure to get a 36V solenoid to put in that RXV! The solenoid in the cart is probably fine, but being a 2016 it is the wrong voltage for the controller.
BobBoyce is offline   Reply With Quote