Buggies Gone Wild Golf Cart Forum - View Single Post - can the two copper bolts on the forward reverse switch be replaced

buckmanmike · 11-25-2008, 02:17 AM

If your studs are not completely damaged you might be able to file them down. They are solid copper, so as long as they are making good contact, current should flow. If they continue to crap up, you might have another problem. I had a broken resistor that kept fouling my speed board contacts, so it could also effect your FNR switch. Good luck. Of course disregard this post if you have a controller cart.

11-25-2008, 02:17 AM	#5
buckmanmike Gone Wild Join Date: Oct 2007 Location: Snellville, Ga. Posts: 1,304	Re: can the two copper bolts on the forward reverse switch be replaced If your studs are not completely damaged you might be able to file them down. They are solid copper, so as long as they are making good contact, current should flow. If they continue to crap up, you might have another problem. I had a broken resistor that kept fouling my speed board contacts, so it could also effect your FNR switch. Good luck. Of course disregard this post if you have a controller cart.