Quote:
Originally Posted by Mishael
My bank has been broken here...i have about a month before I need the tach too. I just wish I could get a dial style for under $30. If I can't, is it possible to use the existing governer to set at around 4200-4300? The problem still being that I can't actually set it anywhere because I don't have a contact/laser tach either to set the governer
|
The RPM limiter is fixed by the factory, no adjustment is possible since it's a sealed unit. The rear end governor is adjustable if you know what you are doing but you will need at the very least a mechanical or digital tach to determine where the governor should be set. Catch 22. You can get an Equus tach for around $30 but it will still require a driver to send the correct signal unless you opt for the impulse spark plug wire version as posted earlier. Nothing wrong with that, folks say they work just fine. I just prefer something a little more subtle than a station clock sized instrument dominating my dashboard.
Check this out however, neat install;
http://www.buggiesgonewild.com/gas-c...precedent.html
FC