Re: RXV Unique Ignition Switch Install Question
Hi RXV tech here.
1) Switch is plug and play.
2) no need to dis-connect battery for RXV switch replacement.
3) do remove keys from both switches while doing swap out.
Little help with install..
1) remove 4 #27 torex screws from under dash.
2) gently pull dash forward and you can reach rear of keyswitch.
3) compress tangs and push keyswitch through front of dash... do not disconnect wires yet.. let switch hang by wires....
4) snap dash in place and replace #27 torex screws.
5) dis-connect keyswitch and connect new keyswitch.
6) test new switch.. forward/reverse
7) press new keyswitch into place.
|