Buggies Gone Wild Golf Cart Forum - View Single Post

Volt_Ampere · 08-03-2022, 12:29 PM

Do NOT do this on the bench! The armature is only supported on one end when the motor is out of the cart. You WILL destroy the motor if you try to run it on the bench with no support on the output shaft! Test it in the cart with the wheels off the ground.

08-03-2022, 12:29 PM	#9
Volt_Ampere Gone Wild Join Date: May 2012 Location: Rio Verde, Az Posts: 7,173	Re: Yamaha G29 motor Do NOT do this on the bench! The armature is only supported on one end when the motor is out of the cart. You WILL destroy the motor if you try to run it on the bench with no support on the output shaft! Test it in the cart with the wheels off the ground.