[JRL]

Thanks, sitting here thinking about the radiator location. Need a good bumper. One stupid move and I'll be on Ebay trying to find another "E" model radiator.
Here's a couple of pix of the final drive prior to installing the swing arm.
The axle mount bolt holes are elongated for chain adjustment. It'll move about 1/8th". Doesn't take much.
Another pic shows the ground speed governor that I removed. I kept the arm intact because it makes a good "interface" for the cart throttle cable to ZX throttle cable. It will allow some easy adjustments for geometry between the cables without cutting up the factory cable ends.
JR