Buggies Gone Wild Golf Cart Forum - View Single Post - Help with Rhox upgradable LED light kit wiring

Dustin Mustangs · 04-25-2017, 08:35 PM

Yep, that is the one. There are two longer leads with female bullets that seem redundant and a third shorter lead with that piggy back spade. One switch position show continuity between either bullet and the spade, the other position does not. The grey bullet on the headlight harness that is mentioned in my diagram came connected to another lead. Leave them like that = low beam. Disconnect them = high beam. I could make an extension and put the switch between those two wires but it seems that is not what they intended. Not only are the connectors wrong, but the wires would not reach.

04-25-2017, 08:35 PM	#7
Dustin Mustangs Not Yet Wild Join Date: Apr 2017 Posts: 5	Re: Help with Rhox upgradable LED light kit wiring Yep, that is the one. There are two longer leads with female bullets that seem redundant and a third shorter lead with that piggy back spade. One switch position show continuity between either bullet and the spade, the other position does not. The grey bullet on the headlight harness that is mentioned in my diagram came connected to another lead. Leave them like that = low beam. Disconnect them = high beam. I could make an extension and put the switch between those two wires but it seems that is not what they intended. Not only are the connectors wrong, but the wires would not reach.