View Single Post
Old 08-11-2011, 11:25 AM   #6
Heliarc
Warthog cart
 
Heliarc's Avatar
E-Z-GO
 
Join Date: Aug 2011
Posts: 502
Default Re: EZ-GO No spark, looking for pulser?

Alright, I think I have a slew of things going wrong.If I hook the battery up normally and hit the accelerator to crank the engine the solenoid keeps clicking and just barely cranks it over.At this point it won't even crank anymore.Tapping the solenoid while holding the throttle down will make the starter jump a bit but that's all.Running a wire directly to the starter cranks it over just fine.

Second issue is that the reverse warning buzzer is constantly going off unless it's in neutral and the p/o mentioned it not working in reverse.I've seen that issue on this forum and it was one of the micro switches I believe.

So, is it possible that these problems are conspiring to rob my engine of life affirming spark?I've cleaned up the grounding points as instructed but that was a big EZ-NO.

Oh and Brew, that avatar you have up, that's about where I want to end up with my cart if I get it going.Looks sweet.
Heliarc is offline   Reply With Quote