Thread
:
13hp clone
View Single Post
03-28-2008, 10:22 PM
#
4
Xtreme Cartz
The Fabricator
Join Date: Dec 2006
Posts: 2,016
Re: 13hp clone
Check the ground on the key switch, if it isn't making a good connection then you will be able to start the engine but not stop it with the key switch. A lot of times the powder coat will cause this to happen.
Xtreme Cartz
View Public Profile
Send a private message to Xtreme Cartz
Find More Posts by Xtreme Cartz