View Single Post
Old 05-04-2017, 12:23 PM   #1
talahips
Not Yet Wild
 
Join Date: Apr 2017
Posts: 6
Post G2 conversion to solid state

I bought an 1989 G2 and have issues with the old speed controller/resistor system. I measured the resistor resistance at about 1.2 ohms. The manual says it should be between 0.48 and 0.54. So my assumption is the resistor likely needs to replaced. Rather than spending money on that, I'm thinking about converting speed control to solid state. Anyone have any advise on this? Easy to do? I know there are probably other threads out there but I didn't see anything recent. I attached pictures of the resistor and speed controller.
Thanks
Attached Images
File Type: jpg Resister & Solenoid.jpg (175.3 KB, 0 views)
File Type: jpg Speed Controller.jpg (136.9 KB, 0 views)
talahips is offline   Reply With Quote