Quote:
Originally Posted by sho305
Sorry  The red/white on a G9 powers up about everything. It goes through key and pedal switch then coil/ignitor/solenoid the whole thing is powered up off that wire.
I have been working on it because it flickers the lights now and never did with the stock engine. The only difference with the clone is the ignition is powered by itself not the cart, all wiring is there just the ignition parts are unplugged and removed. The VR is acting differently, and using 55w driving lights same as before. |
Been checking continuity on all my wires using the diagrams from Cunningham. I thought that r/w was an important one. It attaches to spade terminal at top of starter solenoid correct? Should there be a wire, red, That piggy backs off of the large terminal (one that goes to battery) then off to the key switch?