Buggies Gone Wild Golf Cart Forum - View Single Post

NoleFan4Ever · 07-20-2018, 11:45 AM

No, that would be your Pre-Charge resistor that went between your 2 large posts and is not needed with the XCT line as they utilize the Run/Tow switch. The pic of the diode in the bag is your regen diode and it does need to be installed between the 2 large posts. The end with the red wire needs to be landed on the same large post that has the Main Pack Pos battery cable on it (because that is the striped/banded end) and the other end will land where the cable going to the controller is at. (The battery cable goes on first and is always on the bottom) If you bought the controller and solenoid from David, he will send you a diode, you just need to PM and email him (or Imessage him) as he is out to sea on a ship.....

07-20-2018, 11:45 AM	#5
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: Alltrax XCT install pics. No, that would be your Pre-Charge resistor that went between your 2 large posts and is not needed with the XCT line as they utilize the Run/Tow switch. The pic of the diode in the bag is your regen diode and it does need to be installed between the 2 large posts. The end with the red wire needs to be landed on the same large post that has the Main Pack Pos battery cable on it (because that is the striped/banded end) and the other end will land where the cable going to the controller is at. (The battery cable goes on first and is always on the bottom) If you bought the controller and solenoid from David, he will send you a diode, you just need to PM and email him (or Imessage him) as he is out to sea on a ship.....