Quote:
Originally Posted by Sergio
Did You also check the charger receptacle negative wire to OBC input and the OBC negative output wire to Controller B- to make sure all connections are good and not corroded?
I assume there is only a single cable on the pack negative and that negative cable goes through the OBC opening to Controller B-.
|
The b- from the controller to inside the obc is sealed.
The the negative cable from the charger to the obc is sealed also. I have no continuity on the obc input and output. Guessing the obc grounds during operation?
Yes there is a single negative cable from the batteries through the obc then connected to the controller.