Quote:
Originally Posted by cajun000
My pic is the 2017 Onward OEM solenoid. Similar to your pic, but not exactly. I cannot find a small diode between the two small terminals nor a "+" stamped into the solenoid. I am installing an Alltrax 48-400 contoller and need to know if I should install the diode included with the controller on the larger terminals after removing the resistor currently installed. Also, does this solenoid need another diode installed between the two smaller terminals or does this solenoid have an internal diode.
|
I was wondering this same thing with a 2019 onward. Do we not need a smaller diode to connect the smaller posts?