View Single Post
Old 07-20-2022, 03:34 PM   #2
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
Default Re: Yamaha G29 motor

I would test the motor separately - brush replacement should have made it work again. Connect A1 to F1, A2 to F2 and hook up a battery to A1 and A1 with the wheels off the ground. It should run slowly with an 8V battery. If the motor is good, the controller is probably shot. Brush failures often damage the controller.
Volt_Ampere is offline   Reply With Quote