[MChase7280]

Hi - I'm having the same problem. '99 EZGO TXT with DCS system. Battery voltages are fine (37.9v) and each battery is at 6.2 - 6.3 v. So, while troubleshooting with a DVM, I'm wondering how in the world the solenoid has battery voltage on each side regardless of pedal position? Anyway, I jacked up the back end, I found this out: For forward, the motor will run when pedal pressed but very very slow. Same for reverse. Wife says it worked great going out to the barn yesterday and when she tried to get back to the house it wouldn't move. Battery charge at that time showed about a 3/4 charge on the meter. I've since charged the batteries. I also cleaned all the battery cables, connections. Any ideas? I see that there are "stickeys" mentioned for manuals? Where are these stickeys?