Buggies Gone Wild Golf Cart Forum - View Single Post - 36 volt ez go/ curtis controller wont move

JohnnieB · 01-09-2022, 03:33 PM

If the voltage between B- and M- starts at pack voltage when solenoid clicks, but does not decrease as pedal is pushed, it tells me the high amps circuit is intact, but either the throttle or controller is bad.

Check the ITS (throttle) voltages to the controller.

If it checks out good, the controller is bad. Replace it with an Alltrax SR48400 or larger user programmable controller.

01-09-2022, 03:33 PM	#4
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: 36 volt ez go/ curtis controller wont move If the voltage between B- and M- starts at pack voltage when solenoid clicks, but does not decrease as pedal is pushed, it tells me the high amps circuit is intact, but either the throttle or controller is bad. Check the ITS (throttle) voltages to the controller. If it checks out good, the controller is bad. Replace it with an Alltrax SR48400 or larger user programmable controller.