View Single Post
Old 06-13-2022, 08:59 PM   #5
cartdoc1969
Gone Wild
E-Z-GO
 
Join Date: Sep 2021
Location: Pa
Posts: 279
Default Re: RXV Curtis Controller won't move

If the cart jumps during the startup test, it has a bad brake. One of the startup tests is the controller will try to rotate the motor 1/4 turn in each direction. If the controller sees any movement during the brake test it will fail and not allow the cart to run. You can pull the brake and disassemble it. Clean the parts and see if that helps. Make sure not to over tighten the mounting bolts. Only tighten the three mounting bolts just enough to flatten the lock washers.
cartdoc1969 is offline   Reply With Quote