View Single Post
Old 09-15-2009, 06:56 AM   #3
bisquit476
Not Yet Wild
E-Z-GO
 
Join Date: Aug 2009
Location: Mickey & Minnie Land, FL
Posts: 19
Default Re: 1981 G1 carb info

As far as I know it's the original, but I removed it, took it apart, made sure all the passageways were clear, the jets look fine, and put it back together. The float was set to be all the way up before the bowl valve shut off, which if I remember correctly is too high, so I repositioned it to be about level when it shut off the fuel supply. Reinstalled the carb, got the cart running, but it has a hard time accelerating from idle. Tried adjusting the low speed jet, but no help. By using the choke and playing with the throttle I got the cart to rev up, but when I reduced the throttle to idle, fuel started coming out of the vent tube. The float is still set too high? But then I was looking at other posts in this section and saw the post about the exhaust bbq, and am now wondering if I need to cook that before working on the carb anymore.
bisquit476 is offline   Reply With Quote