[Pawnmaster]

2005 Club car OBC wiring OBC removed from cart

Best I can tell, #10 black wire goes to the charge port which I have eliminated, #18 red wire goes to a sonic weld to the solenoid and to the F/n/r
#18 yellow goes to a sonic weld with green to the controller and green to the MCOR
#16 white sonic weld, pink to f/n/r, grey to the controller and green to the 9pin dash
#18 Brown/white goes to 9pin
#18 light blue to controller
#10 and #6 black going to the controller

If I go from battery negative to the controller I eliminate all the black wires
If I clip the yellow and red wires at the sonic weld the run/tow still functions?
Connect the white, blue whote together at the sonic weld the f/n/r is still connected to the dash 9 pin and the controller (switched power?)

The brown and white can just be capped and buried


Trying to eliminate as much unnecessary wiring as possible