Thanks for the diagram Andy!
I have to assume that the wires coming from the harness into the 5 pin connector are as follows, what do you think???
White = Ground
Yellow = Left Front Turn Signal
Green = Right Front Turn Signal
Red = Left Rear Turn Signal
Brown = Right Rear Turn Signal
I have all the corresponding wire colors coming from the turn signal except Brown... Does anyone know which one I should connect there? The options are Grey, Grey with black stripe, and White. I figure one of these has to connect to the horn.
I think the red male connector from the harness will go to the X on the flasher, then the Black wire from the turn signal will go to the L on the flasher. Just need to figure out the what connects to the P on the flasher???
I uploaded a diagram of all the wires etc... Is there any reason that anything would connect to the brake light wires?
