07-31-2009, 05:29 AM
|
#5
|
Not Yet Wild
Join Date: May 2009
Posts: 29
|
Re: Wiring a 8 Wire Turn Signal w/ Horn
I think I have it figured out now after finding some diagrams. The wires from the harness into the 5 pin connector are as follows...
Red = Left Front Turn
Green = Right Front Turn
White = Left Rear Turn
Yellow = Right Rear Turn
Brown = ?
Other wires from harness:
Red(12V) = X on Flasher
Black(Grd) = ?
The wires from the turn signal are:
Green = Left Front Turn
Red = Right Front Turn
Grey = Left Rear Turn
Black = Right Rear Turn
White#1 = Horn
White#2 = Horn
Yellow = Load on Flasher
Grey w/ Black Stripe = Brake Switch
http://lh3.ggpht.com/_akEXo6yjISQ/Sn...nalWiring2.jpg
http://lh5.ggpht.com/_akEXo6yjISQ/Sn...edomWiring.jpg
|
|
|
|