Re: adjustment screw for 87
Seriously doubt you will be able to buy just the screw. I have no ide what the thread is on it, maybe 4 40, it is small! Could be metric too depending on the carb you got. Probably the easiest, fastest way would be to buy the cheapest carb you could get on ebay and use that screw and hope it is the same thread as yours. Red locktite should hold it just fine especially with the lock nut. Before you put it on, be sure to use brake clean and blow everything dry. Clean and dry is the key. Since you had issues before, maybe even get some of the locktite primer.
Tom
|