View Single Post
Old 05-19-2020, 03:09 PM   #3
spoiler1041
Not Yet Wild
 
Join Date: Sep 2018
Posts: 17
Default Re: blowing down converter fuses

Quote:
Originally Posted by cgtech View Post
You could get a automatic resetting circuit breaker to use while testing, avoiding using a whole box of fuses.

But first, disconnect all loads & wires from the output side of the converter. If it still blows input fuses, it's no good (if its the input fuse that's blowing).
Unfortunately the output quick connect will not come apart and really didn't want to cut it off but guess in order to move forward it must go.....

Thanks
spoiler1041 is offline   Reply With Quote