Re: Alarm sounding in forward. No movement in forward or reverse
Very common.... Sounds like it's just been washed. When water gets in the F&R Switch of an IQ cart it'll cause this exact symptom. Here's what ya do.... Take a small flathead screwdriver and pop the toggle switch out of the black box. You'll see two tabs near the base of the switch... Pop them loose and the switch will separate.... Blow it out or let it air dry for a few hours... Then reassemble it... It's really a simple design, you'll see how it goes back together. If not, let me know. Also, water also gets into the 3 pin plug behind the F&R where the F&R wires attach to the wire harness... Pull it loose and let it air dry... Betcha it'll run.
|