Quote:
Originally Posted by bronsonj
Also, solenoids are voltage specific so a 48v solenoid won't work on a 72v cart. Here are some of the solenoids at a vendor that supports this forum and has great customer service. These are 36 and 48V solenoids but he can likely get any solenoid you need.
https://www.cartsunlimited.net/solenoids.html |
If the OP goes with a Navitas AC system, the controller can be set to output a different voltage to the solenoid than total pack voltage (i.e. in a 72v system solenoid coil can be set for 48v).
I have an Albright 400A that is 48v and I use it with a 72v lithium setup, with appropriate settings as above for the coil (the controller defaults to 48v for the coil, even if you select 72v as system voltage, to prevent damage).