Buggies Gone Wild Golf Cart Forum - View Single Post

bronsonj · 01-22-2021, 08:29 PM

The third and final tab, labeled "MCU_F2-DATA", had the stock values of:
Torque Kp = 300
Torque Ki = 100
Exciting Kp = 300
Exciting Ki = 100
Drive Torque Limit = 333
Brake Torque Limit = 30
Voltage Correction Coefficient = 100
Current Correction Coefficient = 100
Under-voltage Point Setting = 52
Over-Voltage Point Setting = 80
Manufacturer Parameter = 0
Control Mode Selection = 0
High Speed Mode Torque Limit = 250
Derating Mode Start-up Voltage = 55
Low Consumption Mode Speed Setting = 2500

There appears to be two or three more settings that scrolled off the screen on this picture. Please let me know if this is anything like what you're seeing or if this info helps you get back to stock.

01-22-2021, 08:29 PM	#8
bronsonj Gone Wild Join Date: Jan 2013 Location: Saint Petersburg, FL Posts: 2,089	Re: New Electric Moke, need more speed The third and final tab, labeled "MCU_F2-DATA", had the stock values of: Torque Kp = 300 Torque Ki = 100 Exciting Kp = 300 Exciting Ki = 100 Drive Torque Limit = 333 Brake Torque Limit = 30 Voltage Correction Coefficient = 100 Current Correction Coefficient = 100 Under-voltage Point Setting = 52 Over-Voltage Point Setting = 80 Manufacturer Parameter = 0 Control Mode Selection = 0 High Speed Mode Torque Limit = 250 Derating Mode Start-up Voltage = 55 Low Consumption Mode Speed Setting = 2500 There appears to be two or three more settings that scrolled off the screen on this picture. Please let me know if this is anything like what you're seeing or if this info helps you get back to stock.