View Single Post
Old 01-24-2021, 11:11 PM   #12
amarko
Not Yet Wild
 
Join Date: Jan 2021
Posts: 9
Default Re: New Electric Moke, need more speed

I had the controller supplier from China email me some parameters and notes below to try but I’m out of town and won’t have a chance until next week to plug these numbers in.

“1, Change forward /backward(reverse) direction pls revise it from F28: Start position self-learning, change the original parameter 2 into 3(this F28 is very important to the whole controller,pls don't make any other change, otherwise the controller will be no use and we can't program it except return to the factory, pls be carerful and don't make any other change). And also revise F13: change the encoder/Hall sensor direction 1 into to 0. Both parameters need to be changed then get the right direction. (based on your previous UWV but no change 17/18 cable situation).

2, Adjust current: Uphill climbing current setting: F37 driving torque limit, increase value = increase current. Flat road current setting: F45 high-speed torque limitation, increase value = increase current, decrease value = decrease current. The above parameters can be adjusted individually.

F0 = 0
F1 = 7.5
F2 = 60
F3 = 120
F4 = 100
F5 = 240
F6 = 2700
F7 = 5200
F8 = 25
F9 = 580
F10 = 0
F11 = 0
F12 = 64
F13 = 1
F14 = 0
F15 = 0
F16 = 4000
F17 = 510
F18 = 1200
F19 = 1500
F20 = 1000
F21 = 15000
F22 = 15000
F23 = 3000
F24 = 3000
F25 = 15
F26 = 80
F27 = 1
F28 = 1
F29 = 70
F30 = 80
F31 = 80
F32 = 0
F33 = 300
F34 = 100
F35 = 300
F36 = 100
F37 = 333
F38 = 28
F39 = 100
F40 = 108
F41 = 45
F42 = 65
F43 = 32
F44 = 0
F45 = 300
F46 = 64
F47 = 3000
F48 = 2600
F49 = 2
F50 = 0
F51 = 131
F52 = 172
F53 = 732
F54 = 0
F55 = 7
F56 = 0
F57 = 1
amarko is offline   Reply With Quote