Re: yamaha wont stop runnin
Was the cart running right before you changed the belt and brushes? Can you accelerate and drive the cart or is it just turning over (not firing) the starter and engine with battery power? If you didn't disconnect the neg battery post while you were changing out the brushes you may have shorted out your pedal switch and/or key switch. Your key switch should stop the cart no matter when you shut it down. So I know you have some sort of fault there. Pull out the cup holders to reveal the switch wires and try to shut it down by disconnecting the connector. If that shuts it down than it's the switch, if not the fault is further down the line. The same detection method would work with the pedal switch.
|