Buggies Gone Wild Golf Cart Forum - View Single Post

GAC · 06-04-2013, 08:36 AM

I fabricated both brackets from 2-1" angles and welded spacers between the widtch of the actuator mountings which was 1". The top bracket I made 18" long to go from the front of the bed to the hinge point to distribute the loading. I thought it would be a pain to drill the mounting locations but it turned out there was adjustment in the actuator so I didn't have any problem. I ordered another actuator Monday and can't wait to get it installed. I put few hundred #'s of dirt on my cart at a time to move. I don't have any pics because cart is at lakehouse and I only get there every couple of weeks.

06-04-2013, 08:36 AM	#7
GAC Getting Wild Join Date: Jan 2013 Location: Missouri Posts: 76	Re: Club car carryall 2 bed actuator???? I fabricated both brackets from 2-1" angles and welded spacers between the widtch of the actuator mountings which was 1". The top bracket I made 18" long to go from the front of the bed to the hinge point to distribute the loading. I thought it would be a pain to drill the mounting locations but it turned out there was adjustment in the actuator so I didn't have any problem. I ordered another actuator Monday and can't wait to get it installed. I put few hundred #'s of dirt on my cart at a time to move. I don't have any pics because cart is at lakehouse and I only get there every couple of weeks.