View Single Post
Old 07-14-2013, 07:29 PM   #6
Not Yet Wild
Join Date: Sep 2012
Posts: 11
Default Re: G16E Speed Controller

OK, I think I got it...we have the white-blue-green throttle wires, so that should be 0-1K ohms. The diode and resistor go across the coil terminals of the solenoid in parallel, with the cathode of the diode on the positive terminal of the coil. I agree that the coil needs diode protection, it is very common on automotive relays.

I do have access to a laptop but I'd just as soon have them send the controller pre-programmed to stock values. Will they do that?

Thanks to all you guys for the info.
jbfjr is offline   Reply With Quote