Re: Charging System Troubleshooting
If you check the voltage from the charge port, should that match the pack voltage? My pack voltage shows 48 but when I check it from the charge port, it’s 37.
Also trying to check the charger relay. Instructions say there should be two small posts on the relay to disconnect but mine only has one small post. I removed the two top posts, one small and one big and I'm able to get a voltage reading of 43 when I plug in the charger so I guess OBC is good?
When I plug in the charger, it clicks on, then the breaker on the bottom front left trips and it turns off and never comes back on.
I also tried testing the relay and when I plug the DC cord into the cart and check for AC power coming from the second wire on the relay, I don't not have any power from that cord. Should I replace the relay first or the breaker or both? Or is it the rectifier?
|