Buggies Gone Wild Golf Cart Forum - View Single Post

madoc1 · 11-25-2010, 06:34 PM

to cleanly remove the old bolt i think you have to remove the engine. no way see if you are getting staight shot for the drill bit. remove is pretty easy. take off the belts, all wires unplug-just tag them.,unbolt ground cable, and then remove the 4 engine retaining from below.

good time to clean up and check you motor mounts. good luck
also pull the oil line if it is still hooked up-also good time to get rid of and go to premix-a lot safer.

11-25-2010, 06:34 PM	#2
madoc1 no clue Join Date: Sep 2009 Location: spicewood, texas Posts: 3,308	Re: 89 Ezgo fuel pump issue to cleanly remove the old bolt i think you have to remove the engine. no way see if you are getting staight shot for the drill bit. remove is pretty easy. take off the belts, all wires unplug-just tag them.,unbolt ground cable, and then remove the 4 engine retaining from below. good time to clean up and check you motor mounts. good luck also pull the oil line if it is still hooked up-also good time to get rid of and go to premix-a lot safer.