Quote:
Originally Posted by Role
Even after installing another solenoid the problem continues. Turn the key on a jerk in the rear and then a constant beep. If I keep turning it on and off repeatedly it will eventually started working where I can select a gear and drive it.
Anyone suspect that the motor brake needs replacing?
Pack voltage at a resting state is 50.8. Cables and contacts are cleaned and have terminal protection cleaner on them.
If I flip into tow from run and select neutral wheels spin fine.
Flip from town to run and same thing jerks and just does a beep... Beep... Beep... Etc..
Plausible a 2013 ezgo RXV has a bad motor brake?
|
Absolutely could be. Pull the motor brake connector off and check the resistance of the motor brake coil with an ohm meter. It should be between 25 and 28 ohms. A loose connection or missing Run Plug under the cupholder can do the same thing.
Do you know anyone near you that has a handheld that can run a check for error messages? I have one, but I'm not familiar with what part of Mississippi that Madison is in. I have a new motor brake in my spare parts inventory.
Bob