Re: Motor removal
You guys are great. I removed the two bolts from the springs, removed the shock absorbers, let the axle down and got at least the outside of the motor out, that's the part I've got to get down to get the post replaced. I have not been able to get the armature out yet but sprayed a bunch of wd 40 into the spline and hope it will break loose on Monday. If not, I'll have to try to get the casing on the armature while it is in the cart. Does anyone know if I'll have trouble getting the brushes to fit over the armature. Hope not. As I said, I'll try again monday to get the armature out. The rubber mallet trick did not work today, hopefully next time. Thanks for the help.
|