View Single Post
Old 08-14-2008, 08:41 PM   #2
ruredy
Born Wild
 
ruredy's Avatar
 
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
Default Re: Ez Go 4 cyl oil leak

There should be a small o-ring that goes in where the oil passage that goes to the presser switch, this sets inside the gasket where it looks like a bolt goes through. there is a recess in the case for the o-ring to accommodate its thickness. If the o-ring is left out it will blow out the gasket in that area. If a new o-ring is used each time you've replaced the gasket and it's still is blowing out, the case itself may be distorted. the engine manual shows how to check the case for distortion but you have to basically gut the case to do that.
ruredy is offline   Reply With Quote