View Single Post
Old 04-20-2019, 04:38 AM   #10
yawood
Gone Wild
 
yawood's Avatar
Club Car
 
Join Date: Jan 2017
Location: Queensland Australia
Posts: 1,332
Default Re: Trying to install battery meter

Those meters pull virtually no power so they can be connected anywhere. For the first one (the three connector one) you can connect to the green wire on one side of the key switch for permanent 48V, the blue wire on the other side of the key switch for the switched connection and any negative behind the dash (usually black wires) for the neutral.

For the other meter (the two wire one) connect the positive (usually a red wire) to either side of the key switch depending on whether you want it to continuously display or only display when the key switch is on. The negative (usually black) connects to a negative as described above.
yawood is offline   Reply With Quote