View Single Post
Old 03-16-2021, 12:46 PM   #33
ATrain
Gone Wild
 
Join Date: Oct 2012
Location: SoCal
Posts: 671
Default Re: Icon programming/speed limit?

Quote:
Originally Posted by Rasputin View Post
Only mods to the default settings were RPM of 7000 (6000 from factory) and FWD Drive Power of 18 (15 from factory). Lithium pack, 4 passengers. Temp was 75 or so.

Took a 3 mile drive at about 85% of the trip at full throttle to destination. Failure occurred during return trip after 30 minute stop at destination. Failure was while climbing a grade at full throttle. Cart suddenly stopped without warning with complete power failure. Took about 20 minutes before I could turn the battery back on and then everything functioned fine.

It may have been the battery given the complete power loss. I wasn't running the monitors but nothing felt particularly outside of normal temps when I was initially diagnosing it FWIW. When the cart booted back up, the controller was about 35C and motor was at 70C.

As a bonus, I now know to keep a T25 key with me to disengage the automatic parking brake these carts have in a complete power-out scenario.
I'm curious if it was the lithium pack...those things are brand new and not hugely tested. The issue is there are so many LI packs made by random people.
ATrain is offline   Reply With Quote