Quote:
Originally Posted by 81clubcar
From what I have been reading, I will need to install a shunt for the batt monitor, is there any particular place it should/shouldn’t go in that picture? I was thinking about mounting it on the old toaster coil plate next to the solenoid and breakers... that way I can just jump from the batt to a breaker - to the shunt - then on to the Alltraxx (or wherever it goes, don’t have the diagram in front on me currently)
Thanks all.
|
You're going great 81! The ECO supplied shunt will mount directly onto the negative terminal of the ECO Battery. Then you'll wire directly to your breaker and out of the breaker to the B- terminal of the Alltrax.
I thought I had a photo of mine but I already had the shunt covered with the Black terminal protector that ECO sent.
Under the red terminal protector is a 200 amp fuse that was on my original battery pack. This was the easiest installation I have read about.
I'll try to take a photo tomorrow showing the shunt and fuse without the covers.