View Single Post
Old 01-07-2011, 02:23 PM   #7
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 2001 EZ-GO Clicking won't go

I think you still have some bad contact in the F&R.... In your pic the blue tape is on the terminal at 9 o'clock and 6 o'clock Jumping them connects motor terminal S1 with Controller terminal B+.... You say you have only F or R now. Try this test ~ swap cables at 9 and 3 ... do not jumper, just swap them. If you have Rev and not Forward now the F&R contacts are likely still at fault.

You can try tighten the nut (B) on the Center Pivot (X) nut a turn or 2 (max) to increase contact pressure.
Attached Images
File Type: jpg F&R Exploded for prints.jpg (75.8 KB, 24 views)
scottyb is offline   Reply With Quote