Quote:
Originally Posted by 4vertical
Don, is there anything about this in the manual?
|
No there isn't Aaron!
I'm thinking U bolts also!
Bill,
You shouldn't have to disconnect the front spring bolts and move the engine back to install the snubber,
Once you get the snubber bracket centered, put a jack stand under the engine pan,
jack it up so the bracket is off of the bottom stop (frame) about 1/2",
and simply remove the snubber bracket with the 2 bolts holding it on, install the snubber on the bracket,
and reinstall the snubber/bracket on the engine pan!