Putting in a lift kit
Just getting started on a winter project.
I have a 1993 club car ds gas. Putting in a 6" lift kit and having a little trouble.... on the rear I'm putting in heavy duty springs and the lift block . On this cart the rear end is attached to the engine and mounting plate and after putting everything together the hole in the lift block is 1 1/2" off from the alignment bolt on the spring and I can't muscle it in by hand. Will I have a problem if I rig up a bottle Jack and push it back out? Also by putting in the block it dropped the motor down the 6" and I can't see it coming back up with the heavy springs. Thanks for any help. CP
|