Buggies Gone Wild Golf Cart Forum - View Single Post - Cart Project Complete Custom Rebuild from Frame Up

dundeebarnbuggy · 01-19-2022, 10:04 PM

Question. Are you able to side load the crank/bearings [as in pulling a belt] on a D1100? Reason I ask is I am running 2, 4 cylinder Kubotas V2203, both pulling belts, one on a compressor, the other on a generator and I had to use stub shafts with bearings for these applications. According to the factory recommendations, the main bearings otherwise would not last long with a heavy side load. Just a friendly heads up.

01-19-2022, 10:04 PM	#13
dundeebarnbuggy Gone Wild Join Date: Oct 2016 Location: Dundee quebec Posts: 3,190	Re: Cart Project Complete Custom Rebuild from Frame Up Question. Are you able to side load the crank/bearings [as in pulling a belt] on a D1100? Reason I ask is I am running 2, 4 cylinder Kubotas V2203, both pulling belts, one on a compressor, the other on a generator and I had to use stub shafts with bearings for these applications. According to the factory recommendations, the main bearings otherwise would not last long with a heavy side load. Just a friendly heads up.