Re: 2013 Rem DS 7D
More Information on chasing frame voltage/motor test.
How are these readings???
Ohm'd the motor, ground=diff case
A1/ground 1.06M ohm
A2/ground 1.06M ohm
A1/A2 .3 ohm
F1/ground OL
F2/ground OL
F1/F2 1.8 ohm
Wiring: Black wire from OBC is tied with B- to top controller terminal and the wire running to the stud terminal in earlier picture.
MCOR Test
Across MCOR White-Purp/white 6.85k
Yellow-White 7.98k pedal up - Pedal down. 1.75k
Yellow-purp/white 1.13k pedal up - Pedal down. 7.7k
IQ test: All B+ signals to Speed controller test good. Tow switch, Key switch, F/R switch. All have voltage along with B+ signal to kick in solenoid.
|