Thread: fuses
View Single Post
Old 04-10-2010, 02:59 PM   #9
scubabud
Ban Puppy Mills & Stores!
 
scubabud's Avatar
Club Car
 
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
Default Re: fuses

Quote:
Originally Posted by shatteredglass View Post
ok now have power to the cart but it looks like it blew the bulbs head light and taillight ? i hooked everything up the way it said harniss and all so not sure how the kit convets to 12 volt on a 48 volt system?
Where did you take the power from for your light kit? You have 4 12v batteries and you should have used battery number 4, (passenger side front battery for both 12+ and 12 -. There is a blue lead already there for the 12v + off that battery. The grounding lead should come from that same batteries negative post if using an aftermarket kit.

Did you take the power off of the ignition switch which is 48v by mistake?

My kit has LED's for the rear taillight and halogens for the front.

As Old Mec says... first determine where you are pulling your power from, and you might be able to just replace the bulbs and flasher if aftermarket kit.
Attached Images
File Type: jpg DSCN1189.jpg (109.7 KB, 10 views)
scubabud is offline   Reply With Quote